United Kingdom 
Español 
Français 
Netherlands 
English 
Deutsch 
- For unarmoured / cables without earth screen
- Low voltage 0.6/1 (1.2) kV
- Inside / outside underground, above ground, underwater, in cable ducts
- Compact dimensions
- Good resistance against UV and chemicals
- High shrink ratio
- Fast shrinking
- High tensile strength
- Excellent adhesion to all plastic insulated cables and metal components
- Light weight
- Installation instructions with drawings
| Mechanical properties | Waarde | Test Methode |
| Tensile strength | 12 MPA | ASTM D638 |
| Elongation at break | 350% | ASTM D638 |
| Density | 1.2 gm/cm³ | ASTM D792 |
| Hardness | 45 shore D | ASTM D2240 |
| Thermal properties | ||
| Accelerated aging | 120°C / 500 hours | ASTM D2671 |
| Tensile strenght | 11 MPA | ASTM D638 |
| Elongation at break | 300% | ASTM D638 |
| Heat shock test (250°C / 30 min) | No damage | ESI - 09 - 11 |
| Low temperature flexibility (-40°C / 4 uur) | No cracking | ASTM D2671 |
| Shrink temperature | 125°C | IEC 216 |
| Continuous temperature limit | -40°C tot +100°C | IEC 216 |
| Electrical properties | ||
| Dielectric strength | 12 kV/mm | ASTM D149 |
| Volume resistivity | 1x10¹² Ohm cm. | ASTM D257 |
| Dielectric constant | 5 (max.) | ASTM D150 |
| Chemical properties | ||
| Water absorption | 0,2% | ASTM D570 |
| Resistance for fluids | ASTM D543 | |
| Resistance for fungi | Less than 1 | ASTM G21 |
| Corrosion resistant | No corrosion | ASTM D2671 |
| UV resistant | 350 hours at 700C | Xenon method |
| Smoke density | UL 94 V0 rating - halogen free | ASTM - E662 |
| More information | In all our heat shrink products, we start from the principle that the products must be reliable and as good as the cable itself. The high quality of the heat-shrinkable products, and to the detailed instructions for use comply with this principle. The large and complete range of heat shrinkable products consists of connecting, transitional and end sleeves and various products for various cable constructions. The products include all necessary materials for a perfect protection of the cable. The shrinkable products are manufactured from high quality raw materials with very high cross-linking and can be provided with an internal coating if required. Depending on the application use these internal coating consist of an adhesive layer, or a mastic layer. The production is carefully monitored according to ISO 9001
|
|---|---|
| Home page product list | No |