FiloSeal+HD FIRE

Go Back

Duct sealing system FiloSeal+HD FIRE is our new highly certified fire, gas and water sealing system for both ducts and transit frames
  • Up to 4 hours fire resistance in transit frames (single side)
  • Up to 4 hours fire resistance in ducts
  • Tested to BS EN1366-3 2009
  • Tested to AS1530.4-2014 (Australian / New Zealand fire standard)
  • Tested to London Underground - LUL S1085
  • Tested to European rail applications - BS EN 45545
  • Tested to French rail standard CIt NF F16-101
  • Tested to Smoke index - ISO 5659-2:2012
  • Tested to Oxygen index - BS EN ISO 4589-2:1999
  • Up to 2 bar pressure resistance
  • 100Kg pulling force on the cables when sealed
  • 10xd at 45º, with 1 bar pressure bending test
  • Engineered duct sealing solution
Download product sheet

FiloSeal+HD FIRE

FiloSeal+HD FIRE provides a strong support system using the fire resistant hexagonal blocks made of our specially formulated material called 'Formite' which builds up like a honeycomb structure. FiloSeal+HD FIRE is suitable for sealing  empty or any cable configuration or pipes contained in one duct and also allows easy re-entry of the seal to add or remove cables or pipes as required

hexagon tubes

The Filoform duct sealing system FiloSeal+HD FIRE uses our fire-resistant MD+ sealant which is easily applied from a standard skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).

After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

Instruction

FiloSeal+HD FIRE is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses strong, but flexible hexagonal blocks to support the cable and provide a strong backing for the seal

The unique design of the hexagonal blocks makes positioning and separation of the cables very simple while also providing a strong backing for the MD+ to be applied on.

  • Fire resistant - tested to BS EN1366-3 2009
  • Fire resistant - tested to AS1530.4-2014 (Australian / New Zealand fire standard)
  • Tested to London Underground - LUL S1085
  • Tested to European rail applications - BS EN 45545-2:2013
  • Tested to French rail standard CIt NF F16-101
  • Tested to Smoke index - ISO 5659-2:2012
  • Tested to Oxygen index - BE EN ISO 4589-2:1999 (High Oxygen index)
  • WIMES Compliant (3.02 2013 6.4.3.2 b)
  • Flexible, one component fire resistant adhesive and sealing compound in a cartridge - (310ml)
  • Kits are complete with backing and mastic to fill an empty duct of the quoted kit size
  • High levels of Gas and Water tightness
  • Excellent adhesion, applicable to all common building materials
  • Resistant against Water, Alkaline, Chemical agents
  • Resistant to termites (Mastotermes Darwiniensis) Northern Australian termites
  • Resistant to Rats
  • Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)
  • Non-corrosive
  • Solvent-free
  • Shock absorbing
  • Non-toxic, neutral and almost odourless
  • Also suitable for limiting the EX-zones during transitions (observe chemical resistance)
  • Complies with 2011 NEC Articles 225.27, 230.8, 300.5(G), 300.7 (A) on Raceway Seals, and 501.15 (B)(2)
  • Suitable for any shaped duct/borehole/opening
  • Quick and easy installation
  • A complete kit
  • Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
  • Engineered duct sealing solution
  • Suitable for renovations, can be installed retrospectively
  • Over 25 years of operational experience

If Fire resistance is not required, click here for FiloSeal+HD

FiloSeal+HD

Kits are complete with backing and mastic to fill an empty duct of the quoted kit size

Fire resistant duct sealant MD+

Density 1.2 gr/cm³  
Pressure resistance up to 2 bar  
Pulling Force 100kg (1000 newtons)  
Bend Test 10xd at 45º, with 1 bar pressure  
Flow < 2mm ISO 7390
Colour red-brown  
Skin over time (23C/55%RH) ± 15 minutes  
Curing 3 mm / 24 hours  
Hardness 30 shore A DIN 53505
Elongation 100% DIN 53504
Tensile strength 0.8 N/mm² DIN 53504
Operating temperature +5°C tot +40°C  
Temperature resistance -40°C tot +120°C  

Formite hexagonal blocks

  • Material - Mixture of substances (Non Hazardous) – graphite based
  • Resistant to humidity & atmospheric influences
  • Free of organic solvents
  • Zero halogen
  • Colour - Black / gray
  • Properties - Flexible

Small hexagonal block 
Dimensions single tube is O/D = 18mm I/D = 11.5mm, Length 60mm

Large hexagonal block 
Dimensions single tube is O/D = 27mm I/D = 18.5mm, Length 60mm

More Information
More information

Download: FiloSeal+ disclaimer

Photos of the BS EN1366-3 2009 test at Exova Warringtonfire

Fire test

Fire test

Home page product list No

Products
Grouped product items
Sku Product Name Duct diameter min.-max. (mm)

Enter the quantities you want to order / request.


Keep the quantities equal to the Order unit

Order unit
Qty
280070 FiloSeal+HD FIRE - 75mm > 110mm Ø 110 max. Order unit per piece
280080 FiloSeal+HD FIRE - 125mm > 160mm Ø 160 max. Order unit per piece
280090 FiloSeal+HD FIRE - 180mm Ø 180 max. Order unit per piece
280100 FiloSeal+HD FIRE - 200mm Ø 200 max. Order unit per piece
280110 FiloSeal+HD FIRE - 225mm Ø 225 max. Order unit per piece
280120 FiloSeal+HD FIRE - 250mm Ø 250 max. Order unit per piece
Products